BMW recycles battery raw materials without chemicals and thermal methods
A new recycling competence centre to be built in Lower Bavaria.
In battery recycling, the batteries are normally discharged first, then the components are separated mechanically. Finally, the metals contained are separated using chemical or thermal processes. Both have their disadvantages: chemicals produce dirt and a lot of energy is required for melting. BMW, however, wants to recover battery raw materials in future without resorting to thermal or chemical processes.
In the process developed by BMW itself, leftovers from cell production as well as entire battery cells are mechanically broken down into their components, according to BMW. How exactly this works is not explained. In any case, the raw materials obtained in this way are to be reused in BMW's own pilot production of battery cells. The Group has such a pilot production facility in Parsdorf near Munich.
The new method will be put into action in a new competence centre for battery cell recycling (Cell Recycling Competence Centre; CRCC). This centre is being set up in Kirchroth in Lower Bavaria (between Straubing and Regensburg).
BMW working on next-gen batteries:
BMW is investing around £8.3 million in the competence centre. The CRCC is being built on an area of 2,200 square metres. An existing building will be extended for this purpose. The production facilities are to be installed in the building from the second half of 2025. The validation of the recycling process can then begin. Later, battery cell material in the mid-double-digit tonne range is to be recycled there every year. Around 20 people will be employed in this process.
The most valuable battery raw materials include lithium, nickel, cobalt, and copper, as well as graphite and manganese. Recycling them is not only necessary from an ecological perspective, but also from an economic one. "Direct recycling will help to reduce the costs of our battery cell pilot line," says Markus Fallböhmer, Head of Battery Production at BMW. BMW is expanding its expertise with the new competence centre. "From development to pilot production to recycling", a closed cycle is being created, all with short distances in Bavaria.
BMW is pooling its battery cell expertise in three competence centres:
- Battery Cell Competence Centre (BCCC) in the north of Munich: Cell development and small-scale production
- Cell Manufacturing Competence Centre (CMCC) in Parsdorf near Munich: pilot line for scaling up battery cells
- Cell Recycling Competence Centre (CRCC) in Kirchroth: Recycling the surplus from Parsdorf
The electrical energy from the discharged cells is to be conserved in energy storage units in the building and used to operate the recycling facilities. The energy concept is supplemented by photovoltaics on the roof of the building. The competence centre is being built and operated by Encory GmbH, a 50-50 joint venture between BMW and the recycling specialist Interzero. In contrast, the intellectual property of the recycling process lies entirely with BMW.
Source: BMW
RECOMMENDED FOR YOU
Man Gets His Car Back From the BMW Dealership. Then He Realizes They Unplugged His Dash Cam: 'This Is Not a Good Sign'
This Is Cadillac's Most Powerful Blackwing Model Yet—And It's Manual Only
RIP: These Dead EVs Won't Make It To 2027
'Hertz Has Falsely Accused At Least 360 People:' Enterprise Accuses Couple Of 'Ruining' Dodge. Then The Couple Pulls Uno Reverse
'Take A Picture': Woman Says Her BMW's Gas Tank Is Always Empty After Dealership Service. Then She Tries To Catch Worker In A Lie
The Worst-Selling Cars Of 2026 So Far (Yep, Mostly EVs)
BMW Gives The iX3 A Nicer Interior, But Most People Can't Buy It