Arden Range Rover AR7
From Arden press: Elegance, discreet sportiness and understatement have always been the characteristics of British cars. The car enhancement specialist and registered automobile manufacturer from Krefeld was unable to resist the attraction of these vehicles over 30 years ago. It has for many years been a refuge for customers wanting it to individualise their Jaguar or Range Rover and emphasize its typical characteristics. Ardens latest development is the AR7. It is based on the Range Rover LM, which Arden completely converts and provides with more overtaking prestige. The base vehicle which is impressive due to its sheer size becomes captivating with its extraordinary sporty look. Meanwhile enhanced performance of the Range Rover compressor motor contributes to the sporty driving performance.
Arden obtains not less than 480 HP from the from the supercharged V8, its cubic capacity having been raised to 4.5 litres. Together with the torque which has been increased to an ample 680 Nm, this provides the not exactly light Range Rover with an appealing driving performance. The sheer power catapults the British SUV from nought to one hundred km/h in 6.5 seconds. Outstanding engine power goes without saying. Even if speeds beyond 200 km/h do not happen often due to the flow of traffic, the Arden AR7s 480 HP make over 240 km/h possible.
Arden adapted its aerodynamic components to the Range Rovers basic design in a masterly fashion. As usual with Arden, the kit looks as though it fits seamlessly. The completely re-designed, in total 6 cm wider front apron, which replaces the production part, features a hand-made stainless steel grill and air vents. These features emphasize not only the dynamic and powerful appearance, they also provide more effective air supply to the cooling units behind. Arden has made substantial improvements to the aerodynamics, effectively reducing lift to the front axle; this has a lasting benefit on handling performance at higher speeds. The LED daytime running lights deserve special attention. They comply with the future European standards and are harmoniously integrated right and left above the large air intakes. To complete the powerful appearance, Arden also enhances the Range Rover with wheel arch extensions, side skirts and a newly developed rear apron, which like the front apron features several grill inserts.
With regards to harmoniously designing the rear area, Arden adapted the design of the exhaust tail pipes of the stainless steel sport exhaust system, which was exclusively hand-made for the new AR7, perfectly to the design of the rear apron. The system which produces a marvellous resonant sound ends in rectangular tailpipes, with its openings characterized by a horizontal center bar, so that they do not appear too overpowering and meet Ardens standards for understatement.
The Sportline wheels have a large share in the appearance of the Arden AR7. Arden offers the three-part forged wheel in 22 or 23. The increased size compared with the production Range Rover clearly improves the handling of the SUV and gives the driver more driving pleasure.
Whoever decides on enhanced power should also think of suitable braking performance. So that the Arden AR7 comes to a standstill as quickly as it accelerates, Arden incorporates at the front a 6-piston and at the rear a 4-piston braking system which distributes its power emphatically on the internally ventilated and perforated brake disks.
The interior does not come off badly with Arden either. In the in-house saddlery all of the interior work is carried out to the highest precision and converted into the customers requirements with great attention to detail. Leather and alcantara are made to measure in any colour desired, a wide variety of high-grade woods are processed and also chrome, carbon and aluminium applications are made for customers.