MTM Audi RS6 Clubsport
From MTM press: The aim is now, 350 km/h, where the MTM RS6 Clubsport has more power and less weight than the others. The result: more than 730 HP, around 860 Nm of torque and weight just under two tons. The 5.0 TFSI V10 Biturbo with 6-speed triptonic with DSP, after its power increase in Wettstetten/Ingolstadt, accelerates from 0 to 100 km/h in 3.6 seconds and 200 km/h will be reached just after 11 seconds.
The ingredients for the “MTM RS6 Clubsport” project are clear: less weight and much more power than the series‘ car. Besides the modification of the ECU, the engineers from MTM have demonstrated technical finesse to achieve more than 730 hp and 860 Nm of torque available at 2.750 U/min. In addition to that, a MTM stainless steel exhaust system – catalyst and rear silencer (4-pipes, each one 80 mm with throttle valves in 2 pipes and control system), as well as other details and modified high-rev gearing have been built-in. About suspensions, the RS6 Clubsport gets a MTM height adjustable suspension kit that allows a 10 to 45 mm lowering. Concerning the wheel set, the BIMOTO rims in 20” or 21” are suggested with, for example, Michelin Pilot Sport PS2 Tyres in the size 305/30 ZR 21. The standard Carbon-Ceramic brakes, which Roland Mayer approves, are left on the car but stronger air brake system pipes can also be ordered on demand. Whoever wants to convert his RS6 into Clubsport is highly recommended for the MTM high power brake system with 405 x 36 mm disks and Brembo’s monobloc callipers with 6 pistons. Last but not least, MTM offers a changed front axle geometry, which, in addition to the above mentioned suspension kit, assures a much better behavior in curves.