Honda has just unveiled a very attractive motorcycle called NM4 Vultus which is more than just for show as the bike will actually go into production.

Honda has just unveiled a very attractive motorcycle called NM4 Vultus which is more than just for show as the bike will actually go into production.

We know this isn't WorldMotorcycleFans.com but this story was just too good to pass up as Honda has introduced a very attractive and futuristic-looking motorcycle called NM4 Vultus at the 30th Osaka Motorcycle Show in Japan. Honda says the motorcycle's design incorporates influences of "futuristic machines seen in the anime and manga television and film styles, known collectively as "Japanimation" which takes the cruiser concept further.

Power is provided by the same two-cylinder 745cc engine available in other Honda NC products and works together with a dual-clutch transmission featuring Drive and Sport modes along with a "trigger-operated computer game-style manual MT mode." Up front there's an 18-inch wheel covered by a 120/70 ZR18M/C tire and at the back Honda has fitted a 17-inch wheel wrapped around in a chunky 200/50 ZR17M/C while an ABS system is offered as standard equipment.

Additional details can be found in the attached press release.

Honda plans on putting Gundam-styled NM4 Vultus motorcycle into production